When considering a leak test beware - there is no magic bullet. The correct leak test instrument is determined from many factors including the test pressure, the leak rate, the part's size, the part's construction, the cycle time, the budget, the features... No single measurement technology is the cure-all, which is why ATEQ manufactures a variety of leak test measurement systems. An ATEQ leak test instrument may use any of the following technologies - flow, mass flow, pressure decay, differential pressure decay or ioniq. It is usually a technical consideration that will determine the measurement technology used for the leak test. Often there is an overlap. It is this overlap that can confuse the issue when comparing the quotes for several leak test companies. Be careful sometimes a company will quote one technology because that is all they make. In that case, they are not necessarily looking out for you and your leak test - they are looking out for themselves. At ATEQ if we are to work as your consultant, we will recommend the appropriate technology. If you already have a preference concerning one leak test technology rather than the other, then tell us. Our modular leak test line can very easily accommodate your needs.

Flow Test:
ATEQ's flow test instruments are available for testing in both pressure and vacuum. Available flow test technologies include flow and continuous flow.

Calibration equipment for your Leak Test:
ATEQ makes it easy to validate your leak test, to calibrate any leak or flow orifices and to conduct leak or flow rate studies. Our portable leak and flow calibrator can be taken to your production line and it can be used in your lab. Traceable and simple to use - anywhere.