Highlights: cost-effective, volatile low-viscosity gas, independent of test volume and temperature, leak localization

H6000 PORTABLE LEAK DETECTOR

FOR FINE LEAK DETECTION

The H6000, a new comer in the ATEQ range of leak detectors, is one of the finest gas tracer and hydrogen leak detectors on the market today. This gas is less expensive than Helium gas.

Furthermore, it’s a volatile, non-toxic and non-poisonous gas with any environmental impact. The H6000 is equipped with all features for easy integration in industrial process and laboratory one.

H6000: APPLICATIONS

AUTOMOTIVE
- Air Conditioning
- Radiators
- Exhaust
- Transmission…

EMOBILITY
- Battery Packs
- Pouches & Cells
- Modules
- Housing…

PACKAGINGS
- Aerosol Caps
- Plastic Bags
- Sprays
- Plastic Bottles…

ELECTRONICS
- Hard Disk
- Watches
- TV Screen
- Camera Lenses…

MEDICAL
- Blister Packs
- Fluid Bags
- Filters
- Condoms…

H6000: FEATURES

Generated Suction Flow control
Internal memory: 2 Go
Visual (red/green leds) and audible signal for results
USB port
Bag for H6000
• H6000 fixed
– Voltage 60 W – 50/60 Hz – 90/260 V AC
– Relay board 5 inputs/ 7 outputs
• H6000 portable (autonomy 8 hour) lithium battery
– 12 VDC – 4400 mA/h
– Easy removable battery pack
– Supplied with 2 batteries
Detection of leaking gas traces
Range: 1.10-4 mbar l/s to 2.10-2 mbar l/s
128 programs
IP 54 protection

ATEQ H6000 hydrogen leak detector rear panel showing battery pack and connector port

ATEQ H6000 sniffer probe with coiled cable for tracer gas leak detection

GAS MEASUREMENTS

Range	Accuracy up to*
1.10-4 – 2.10-2 mBar.l/s	10% of the measured value in laboratory conditions

Accuracy: linearity + repeatability + hysteresis *Optional laboratory accuracy **Maximum Test Pressure 3 bar

H6000: SPECIFICATIONS

PHYSICAL
- Weight : 3 Kg (H6000 + Sniffer)
- Dimensions : (WxHxD) 577x157x381 mm
ELECTRICAL SUPPLY
- 100 – 240 V AC / 50 W
TEMPERATURE
- Operating : + 10°C at + 45°C
- Storage : 0°C at + 60°C

INTERFACE
- Navigation keys
- 4 lines LCD 14 characters
ELECTRICAL CONNECTORS
- 3 pin – plug (2P+T)
PNEUMATIC CONNECTION
- 2,7/4 and 4/6

H6000: TECHNOLOGY

High precision method

With this test method a sniffer probe is used to monitor rising concentrations of the leaking tracer gas that is collected in a surrounding chamber.

Diagram of ATEQ H520 vacuum chamber leak test method with gas supply, test part, and vacuum sensor

External probe method

The operator can search for the leak location with the test probe. The device detect and every gas leak with the probe and displays the gas concentration.